Controller operating manual
15.11.2020 – Version 1.1
TCS.2 series –
thermofin
®
control system 2
nd
generation
Page: 22/162
Operating manual - translation into English © thermofin GmbH
Picture 12
Picture 13
3. INFO / STATUS
On this page you will find all relevant manufacturer information as well as the software
and hardware versions. This information is urgently required in order to provide the
best possible help with any support requirements (see Picture 12).
Status display with the following content:
- Currently loaded software version
- Version of the runtime system (operating system)
- CPU number
- Kernel version
- Bootloader version
- Boot switch
- Order number thermofin
®
/position in the order
- Date and time
- Currently set IP address
- Network mask
- Firmware version
- Summer or Winter operation
- Status and type of requirement (release)
Off
: Device has no external release (see chapter 4.2.1:
Control
->
Requirement
)
or is switched off locally (red symbol)
NC:
Release active,
N
ormal
C
ooling
FC:
Release active,
F
ree
C
ooling
(Setpoint changeover active, see chapter 4.2.2:
Control
->
Setpoint
changeover
)
HR:
Release active,
H
eat
R
ecovery - only with condensers! (Setpoint
changeover active, see chapter 4.2.2:
Control
->
Setpoint changeover
)
