Controller operating manual
15.11.2020 – Version 1.1
TCS.2 series –
thermofin
®
control system 2
nd
generation
Page: 61/162
Operating manual - translation into English © thermofin GmbH
Picture 33
The bus must be stopped in order to start the function selected in
①
. To do this, press the “Stop”
button (see Picture 32).
As soon as the bus has stopped, the symbol
appears: “Write parameters to fan”.
After pressing, the
function selected in
①
starts.
The status bar shows the progress of the
loading process.
When exiting the menu, the bus is automatically set back to RUN.
Number of faults
Only effective when controlling with 0-10 V DC and step switching.
Editable number of digital inputs that report an OK message or fault. These can be assigned as
desired by a single fan or your group of signalling contacts connected in rows.
Upper limit:
Number of fans in the device (max. 1 fault per fan)
Lower limit:
0 faults
