Controller operating manual
15.11.2020 – Version 1.1
TCS.2 series –
thermofin
®
control system 2
nd
generation
Page: 84/162
Operating manual - translation into English © thermofin GmbH
Picture 61
All errors of the selected
fan are acknowledged or deleted with the “Confirm” button. The
errors of all fans are reset
by pressing the “Confirm all” button.
The list of all error codes, their meaning and options for remedying them are described in the
10 “Messages, warning and alarms” section.
Alarm history
All messages and special operating cases are
recorded in the “Alarm history” submenu.
The most recent entry is at the top. All messages
in the log are saved with error code, text, date and
time. You can scroll through all entries by pressing
the “Up and Down” arrow buttons.
It is a so-called ring buffer for 200 entries each. If the lists are filled with 200 entries, the oldest entry
is deleted when another new entry is written. The entries in these log
lists can be deleted
with this button. However, this function requires a password and is
therefore reserved for
the manufacturer.
Delete password
The TCS.2 has several access levels in which various settings and parameters can be adjusted.
These are secured with different passwords to avoid misuse.
If a user enters a corresponding password, it remains active for 30 minutes after the last touch of the
display. If this time has expired, the password entry is automatically deleted and the control switches
to the start screen. If the user would like to make further protected device settings, the necessary
password (see chapter 2.4 “
”) must be entered again.
If the operator wants to delete the password immediately for security reasons, for example because
he has finished commissioning, it can be done with the button in the main menu (delete password).
