Theben 4940301 User Manual Download Page 31

Page: 31 / 88

ETS communication objects

Manual DALI gateway S64 KNX/S128 KNX

In this version all three colours are displayed together in one object.

Obj

Object name

Function

Type

Flags

G1, Colour RGB

Value

3 Byte

232.600

Sets the colour of the group. The values for red (R), green (G) and blue (B) are transferred

together in a 3 Byte object.
90

G1, Colour RGB

Status

3 Byte

232.600

CRT

Sends the selected colour of the group as a status.

RGB (separate objects)

Obj

Object name

Function

Type

Flags

G1, Colour (RGB) Red

Value

1 Byte

5.001

Sets the colour of the group. The values for red (R) are transferred here.

G1, Colour (RGB) Green

Value

1 Byte

5.001

Sets the colour of the group. Here the values for green (G) are transferred.

G1, Colour (RGB) Blue

Value

1 Byte

5.001

Sets the colour of the group. Here the values for blue (B) are transferred.

G1, Colour (RGB) Red

Brighter/Cooler

4 Bit

3.007

Changes the colour red in the group. Bit 3is set to increase the percentage of red and deleted

to reduce the percentage of red. Bits 0 to 2 refer to the increment size. Bit 0 to 2 deleted is

interpreted as a stop telegram.
87

G1, Colour (RGB) Green

Brighter/Cooler

4 Bit

3.007

See colour change for red.

G1, Colour (RGB) Blue

Brighter/Cooler

4 Bit

3.007

See colour change for red.

G1, Colour (RGB) Red

Status

1 Byte

5.001

CRT

Use this object to send the set colour red as status of the group.

G1, Colour (RGB) Green

Status

1 Byte

5.001

CRT

Use this object to send the set colour green as status of the group.

G1, Colour (RGB) Blue

Status

1 Byte

5.001

CRT

Use this object to send the set colour blue as status of the group.

Summary of Contents for 4940301

























































































Search results

Summary of Contents for 4940301

Reviews:

Related manuals for 4940301

Brands by name

Popular brands

Theben 4940301, User Manual

Search results

Summary of Contents for 4940301

Reviews:

Related manuals for 4940301

Brands by name

Popular brands