ETS parameters
Manual DALI gateway S64 KNX/S128 KNX
53
Behaviour when Switching On
Keep last Object Value
Use ETS Parameter above
Determines whether the last valid colour value or the colour temperature set in the ETS are to
be used.
Note
: if you select “Keep last object value“: Please remember that the colour set in the ETS
will be used if the object value is invalid.
Colour changing Fading Time
immediately
1 Second
5 Seconds
10 Seconds
20 Seconds
30 Seconds
60 Seconds
90 Seconds
Use this parameter to select how quickly you want the colour temperature to change.
Colour changing Fading Time via Dimming
fast (10 Seconds)
standard (20 Seconds)
slow (40 Seconds)
Use this parameter to select how quickly you want the colour temperature to fade during
dimming.
If “RGBW colour“ is selected.
Colour Control Type
RGBW (6 Byte combined Object 251.600)
RGBW (separated Objects)
HSVW (separated Objects)
Selects the objects which will be used for the colour control. For more details about the
combined object, please see chapter: 5 Manual Mode (RGBW, DPT 251.600).
Colour Value when Switching On
Colour selection
Use this parameter to define the colour for switching on. An ETS window appears from which
the colour can be selected.
