Funk-Electronic Piciorgros GmbH
TGW-100/TGW-100R
V2.71 - Page 9 of 59
2.1.3
Mechanical Details
The TGW-100R is enclosed in a black 19" rack mount enclosure with 3 height units.
The main rack has 2 independent power supplies with separated IEC power connectors
on the back. Cables with a European power plug are delivered with the rack.
One TGW-100R rack can support up to 4 TGW-100R plug-in modules, each with two
serial ports for connection to the SCADA equipment.
2.1.4
Interfaces
Both serial interfaces ("COM" and "AUX") use a standard 9-pin D-sub connector. Also
available on the front panel are two Ethernet connectors which are connected by an
internal Ethernet switch. This allows the chaining of the up to 4 plug-in TGW-100R-
units in a rack to a single uplink cable or the easy connection of a PC for configuration.
In total, eight serial interfaces can be realized in one 19" enclosure.
LED lamps on the front panel provide information about the operating condition of the
unit, the Rx and Tx status of all interfaces and the link status to the TETRA
infrastructure in case that the gateway is used for SDS based data transfer.
