Funk-Electronic Piciorgros GmbH
TGW-100/TGW-100R
V2.71 - Page 18 of 59
LED
Function
System Pwr
Power supply input
System OK
Indicates the "Ready" status of the modem (continuously lit). Also
indicates error conditions (coded blink sequences).
COM Tx
Lights up while the TGW-100 sends data via the COM interface
COM Rx
Lights up while the TGW-100 receives data via the COM interface
Aux Tx
Lights up while the TGW-100 sends data via the AUX interface
Aux Tx
Lights up while the TGW-100 receives data via the AUX interface
IP Tx
Lights up while the TGW-100 sends data to the infrastructure for
packet data transmission
IP Rx
Lights up while the TGW-100 receives data from the infrastructure
from packet data transmission
SDS Tx
Lights up while SDS or Status data is being sent to the
infrastructure
SDS Rx
Lights up while SDS or Status data is being received from the
infrastructure
Link (blue)
Off: No link to TETRA SwMi or TGW-100 is operating as packet
data gateway
Flashing: Trying to connect to the TETRA SwMi in SDS mode
Permanent on: Shows active link to the TETRA infrastructure in
SDS gateway mode
