Funk-Electronic Piciorgros GmbH
TGW-100/TGW-100R
V2.71 - Page 56 of 59
6.2
Saving and restoring the configuration
6.2.1
Save a configuration
To back up the configuration of a TGW-100, the file "config.tmo" can be downloaded
from the device by TFTP using the methods described before. The file can be renamed
afterwards for proper identification or archiving.
6.2.2
Restore a configuration
To restore a previously saved configuration, the "config.tmo"-file (which may have
renamed, but the extension ".tmo" must remain untouched), must be transferred to the
TGW-100.
The complete configuration will be changed according the saved one, however the
device properties as serial number and enabled features will remain unchanged.
You can also clone TGW-100 configurations by this method to other TGW-100 devices.
6.3
Using the IPLoader application
The IPLoader application is a small windows software to upload and download files
from and to the TGW-100. Also firmware updates can basically be performed with just
a few clicks.
The software can be downloaded for free and can replace the TFTP-software or the
command line procedure for firmware updates and backing up and restoring the device
configuration.
