Funk-Electronic Piciorgros GmbH
TGW-100/TGW-100R
V2.71 - Page 12 of 59
2.2.3
Mounting
The DIN rail mounting clip is at the bottom of the Module. First the lower lip (spring-
loaded) of the clip is engaged with the lower flange of the DIN rail, with the Module
tilted downward slightly. The Module is then pushed upward (1) and rotated backward
(2) until the upper lip of the clip snaps onto the upper flange of the DIN rail.
2.2.4
Dismounting
To dismount the Module, force it upwards (1), and then rotate its upper end outward (2)
until the upper lip of the Module's clip disengages from the upper flange of the rail.
Then move the Module down slightly to disengage its lower lip from the rail flange.
Mounting
Dismounting
