![background image](http://html1.mh-extra.com/html/tetramodem/tgw-100/tgw-100_manual_1092922013.webp)
Funk-Electronic Piciorgros GmbH
TGW-100/TGW-100R
V2.71 - Page 13 of 59
2.2.5
Power Supply Input
The required supply voltage (12-24 VDC +/-20%) is connected through 3-way screw
terminal connector located on the upper side of the enclosure.
The terminals are assigned as follows (viewed from the front of the module, facing the
front panel):
Outer (left): Enclosure Ground (electrical earth)
Middle:
+ 12 Volt to + 24 Volt (+/- 20%)
Inner (right): GND, 0 Volt from Power Supply