Funk-Electronic Piciorgros GmbH
TGW-100/TGW-100R
V2.71 - Page 30 of 59
3.1.1
Selection of the TETRA infrastructure manufacturer
As the use of SDS for data transmission is depending on the implementation of the used
infrastructure in the TGW-100, the infrastructure manufacturer must be selected in the
TGW-100 for the use of SDS based transmission. This selection is done in "TETRA
Gateway" selection:
Some infrastructure manufacturers may be subject to a license for the TGW-100, so not
all options may be available for activation. The active options in the TGW-100 can be
reviewed in "Service
Configuration", where also additional services can be activated
by activation keys.
Each manufacturer has a different configuration page in the TGW-100 where the service
can be configured according to the data which should be used.
