Funk-Electronic Piciorgros GmbH
TGW-100/TGW-100R
V2.71 - Page 37 of 59
ISSI: The ISSI of the TGW-100. SDS data from the outstations needs to be sent to
this ISSI to be received by the TGW-100. Each TGW-100 needs a different,
unique ISSI. This will be provided by the network operator.
Username: Username on the TCS server to register this TGW-100. This will be
provided by the network operator. Each TGW-100 may need a different
username / password.
Password: Password for the username above.
DCOM IP/name: If a "COM" connection (common in most installations) is used
for the TCS server connection, leave this field blank. If "DCOM" is used, you
need to specify the IP address or host name of the TCS server. here.
As soon as all parameters are configured, the TGW-100 will start to connect to the
infrastructure. As soon as the connection is established, all RF LED's will be lit (on the
TGW-100 DIN-Rail version) and the blue LED (named "PPP" on the TGW-100 DIN-
RAIL, and "Link" on the TGW-100R rack version) will be lit. This blue LED will
indicate a proper connection between TGW-100 and TETRA infrastructure.
