EDIT LAYER
Within a split zone, you can create additional layers. This allows you to play multiple instruments at the same
time or, in addition to the internal sounds, also activate external sound generators with various Program
Change commands and Controller data. You can create up to four layers per split zone, but the total number
of layers in a preset is limited to 12. You also have to ensure that the MIDI channels you are using do not
IDI standard only provides for 16 channels, you cannot address the internal sound-
o layers at the same time while in Separate Mode (see page:
38
).
By pressing PAR, you can define the number of layers for the selected split zone using the +/-
overlap. Because the M
board using more than tw
buttons.
In the Editor, the "+" and "-" buttons in the layer row are used for this purpose.
Press the PARAMETER – button to return to the EDIT LAYER menu. Now, press the ENTER button. We can
now set a number of sound properties for our layer in the split using the PAR/- buttons:
Select Instrument
Determine the sounds for the layer in the split zone here. The available sounds are sorted into groups. The
Note: depending on your Utility/Soundnames setting (GM, NUM or WXT) you may see numbers here instead
his also applies to the view in the Software Editor.
There, you also have the option of directly typing in the digits for the Program Change number and the corre-
sponding Bank Select numbers.
group is at the left, the instrument at the right. Using the VALUE +/- buttons, you can navigate through the
selection, and you can toggle between group and instrument using the PAR/- buttons.
of names. T
AXON AX 100 MKII V. 2.0 (English)
31
