Sequencer Pattern (SEQ PATTERN)
(see page
40
)
Stack
Sequencer Track (SEQ TRACK)
(see page
40
)
Tempo (SEQ TEMPO)
(see page
40
)
The effect is the same as in the LAYER hold mode. The only difference is that the hold switch does not have
to be explicitly pressed for this mode. The layer effect is thus continuously available. Otherwise, the same
parameters are available as in LAYER mode. (also see LAYER...)
Wheel Controller (WHEELCNTL)
WHEEL CONTROLLER (AIX, EXP1, EXP2)
Your AXON supports up to three different wheel controllers at the
same time:
•
AIX (in the Editor: "Pickup") is the wheel on the interface PU 100, AIX 101/103
•
EXP1 and EXP2 are expression pedals that can be connected to the rear panel of the AXON.
Select the wheel that you would like to associate with a MIDI controller with the VALUE +/- buttons and press
ENTER. The first line of the display shows the currently selected wheel, the second indicates the controller to
be associated with the wheel.
Use the VALUE +/- buttons to select the correct controller type. The name of the controller will be displayed in
plain text. Controllers that do not comply with the MIDI specification are shown as "-------- ". The "NO
CONTROLLER" setting will result in the wheel not being associated with a controller and thus being without an
effect. This setting is useful for controlling a running arpeggio without affecting the main preset. Set up the
preset used by the arpeggio so that the wheel at the AIX 101 / 103 interface affects a filter controller (#74). For
the main preset, select "NO CONTROLLER" instead of "VOLUME 7". Now you can control the running arpeg-
gio continuously with the filter effect without affecting the volume of the main preset. Press the EXIT button to
return to the main menu.
46
AXON AX 100 MKII V. 2.0 (English)
