Program Change send (PROGRAM SEND)
(ON, OFF)
Sometimes, you may not want the AXON to send any Program Change commands, for example
when using it together with a Software Sequencer. You can disable this function here. To do so you have to
switch off the Program button in the Editor.
MIDI Output Channel
MIDI channels (B/H, 1 – 16)
Here define the channels on which the MIDI information is to be sent. As men-
tioned above, it is important that the channels used on the same output port of the various layers do not over-
lap. B/H stands for Basic/Hold Channel. The globally configured channels are used. Note that the configured
String Mode has an effect on the MIDI channels. Refer also to page
38
.
shows the currently used channels for all 6 strings.
So that you not lose track of what you are doing, the Editor (to the left of the fretboard on the Presets page)
As a general reference for everything to do with MIDI, we recommend the Internet resource Wikipedia—we
could not offer a better description than that found there:
http://en.wikipedia.org/wiki/Musical_Instrument_Digital_Interface
MIDI Output Ports
(MIDIOUT, SOUNDBOARD, SB, NONE)
In this menu item, define the output ports to be used for
Volume
the layer.
(OFF, 0 – 127)
Each layer in the split can be assigned a separate volume, which you can configure here. Use
the +/ - Value buttons to set the volume to the desired level. In the "OFF" position, the AXON sends no volume
information whatsoever. In the Editor, the Volume button serves this function.
32
AXON AX 100 MKII V. 2.0 (English)
