Changing parameters shared by split zones
Until now, the preset parameters pertained solely to individual layers in the split zones. A preset also consists
of higher-level parameters used to manage split zones and describe shared characteristics. The transitions or
borders between the individual split types are also defined here. To access this level, press the EDIT button
while in Preset mode (PRESET LED on). If you are still in the split zone level, simply press the EXIT button
twice. Use the PAR/- buttons to select the following parameters and modify them with the VALUE
String Split
+/- buttons:
(1-5)
When configuring a string split, use this parameter to specify the first string of the lower string segment,
ith the number 1 being the high E
and 6) will belong to the upper and
i.e. the start of the lower playing zone. The number refers to the string, w
string. For example, if you se the string split to 4, the two bass strings (5
the lower four strings (1-4) to the lower split zone.
Fret Split
(0-23)
If you are using a fret split in your preset, use this parameter to specify the first fret of the left split seg-
e left playing zone as seen on the graphic of the AXON. The number refers to the fret numbers,
with fret 0 being the open string. For example, if you set the fret split to 4, the open strings and frets 1 through
3 will be assigned to the right split zone, while frets 4 and up will belong to the left split zone.
Pick Split 1 and 2
ment, i.e. th
(0-99)
If you are using pick split options in your preset, these parameters determine the width of the individual
picking zones between the bridge and neck. The picking area is divided into 100 units: 0 is the bridge, and 99
tart of the right picking zone. For example, if you enter 50, the picking area will be
corresponds to the start of the fingerboard. If you have divided this area into two zones, the parameter in PICK
SPLIT 1 will indicate the s
divided into two equally large zones. To divide the picking area into 3 zones, specify a value for the start of the
third zone in PICK SPLIT 2. For three equally large zones, set the value for PICK SPLIT 1 to 33 and the value
for PICK SPLIT 2 to 66.
AXON AX 100 MKII V. 2.0 (English)
37
