TerraTec AXON AX 100 MKII Manual Download Page 53

Page: 53 / 75

SEQUENC... (ALL, PATTRN, TRACKS)

Sends all programmed drum sequences, or separated according to patterns and tracks.

Receive SysEx

Receive System Exclusive data

ON:

The AXON is ready

the Editor

to receive SysEx data at its MIDI IN port. This setting must be selected when using

OFF:

All received SysEx data will be ignored.

Edit Sequence

Editing drum sequences.

The AXON supports the programming of drum sequences that can be triggered by

that controls the patterns according to your specifications. Up to 32 program steps are available in which you

ine patterns in any order or repeat them as needed.

This menu item is located in the Software Editor, on the Arpeggiator / Sequencer page.

the hold switch while in Preset mode. A distinction must be made between a pattern and a track sequence. A

pattern consists of a maximum of 16 individual steps of identical length. You may select up to four drum in-

struments from any drumkit and trigger them within the step at three different dynamic levels. Up to 32 pat-

terns can be created in the Pattern Editor. You may then use the programmed patterns in a track sequence

can comb

AXON AX 100 MKII V. 2.0 (English)

Summary of Contents for AXON AX 100 MKII












































































Search results

Summary of Contents for AXON AX 100 MKII

Reviews:

Related manuals for AXON AX 100 MKII

Brands by name

Popular brands

TerraTec AXON AX 100 MKII, Manual

Search results

Summary of Contents for AXON AX 100 MKII

Reviews:

Related manuals for AXON AX 100 MKII

Brands by name

Popular brands