Hold Preset
(1 – 256)
Using the VALUE +/- buttons, choose the preset to be played on the additional channels while the
hold switch is pressed.
Volume
(OFF, 0 – 127)
You have the option of reducing the volume of the hold preset to ensure a correct balance
between the main and hold preset. This will not change the settings of the hold preset itself.
Sequencer Pattern (SEQ PATTERN)
(OFF, 1 – 32)
AXON AX 100 MKII users can play a sequencer pattern (drum sequence) parallel to the hold
preset (see UTILITY MODE, EDIT SEQUENCE). The drum sequence will be started on a separate MIDI
channel as soon as your press the hold switch. The pattern will continue to repeat until you press the hold
switch briefly twice (double-click). Enter the pattern number 1-32 of the sequencer pattern to be played when
the pedal is pressed, or set the parameter to OFF.
Sequencer Track (SEQ TRACK)
(OFF, 1 – 8)
You can also play a complex track sequence (see UTILITY MODE, EDIT SEQUENCE) parallel to
r set the parameter to OFF. Please note that
you can only use one of the sequencer types—in other words, if you intend to use a track sequence, the SEQ
RN parameter must be set to OFF.
Sequencer Tempo (SEQ TEMPO)
the hold preset instead of a pattern sequence. The track sequence (drum sequence) will be started on a sepa-
rate MIDI channel as soon as your press the hold switch. The track sequence can be cancelled by pressing
the hold switch briefly twice. Otherwise, it will continue playing until its defined end. Enter the track number 1-8
of the track sequence to be played when the pedal is pressed, o
PATTE
(EXT, 41 – 240)
The tempo of the sequence can be synchronised externally using the MIDI Clock (EXT
IN) or internally by specifying a BPM (beats per minute) value between 41 (very slow) and 240 (very
/MIDI
fast). In
case of external synchronisation (by a MIDI keyboard or MIDI drums, for example), output does not start until
MIDI Start/Sync commands have been received.
40
AXON AX 100 MKII V. 2.0 (English)
