TerraTec AXON AX 100 MKII Manual Download Page 29

Page: 29 / 75

Press the VALUE +/- buttons to step through all split zones. Depending on the complexity of the preset, you

this point, try once again to analyse the types of splits

difficult at the moment, you will soon get used to the

split zone display. These are explained again in detail in the next chapter. Press the EXIT button to return to

Changing the Split Parameters

Setting Up Split Zones

Select a split zone as described in the previous section and press the ENTER button. SLCT will be flashing to

the left of the graphic.

can assign up to 12 different split zones this way. At

combined in your selected preset. While this may seem

normal playing mode.

Your AXON is now waiting for you to either accept the current split zone by pressing the ENTER button or

up a simple string split, resulting in a continuous bar in the upper part of the

playing area (lower strings). Press the following buttons: PRESET, STORE, EDIT, VALUE – and VALUE +.

define your own splits. Except for the ENTER and EXIT buttons, all of the buttons are now used to set up split

zones. For a start, we will set

Each button represents a section that can be enabled by pressing it once. Pressing the button a second time

will disable the section. Enable all of the sections for the upper playing zone and disable them for the lower

zone.

Additional split options:

Simple fret split

Pick split

Combination of string, fret and pick split

AXON AX 100 MKII V. 2.0 (English)

Summary of Contents for AXON AX 100 MKII












































































Search results

Summary of Contents for AXON AX 100 MKII

Reviews:

Related manuals for AXON AX 100 MKII

Brands by name

Popular brands

TerraTec AXON AX 100 MKII, Manual

Search results

Summary of Contents for AXON AX 100 MKII

Reviews:

Related manuals for AXON AX 100 MKII

Brands by name

Popular brands