Programming a pattern is far more convenient in the Software Editor. Under Arpeggiator/Sequencer, the up-
per area contains a graphic illustration of the 16 possible steps. For each step, you can now select the desired
note or rest from the drop-down menu. You can also insert notes using the right arrow symbol, which pushes
our own pattern to one of the 16 user memory positions using the "Store to" button.
all the notes after it one step to the right. The left arrow symbol deletes the selected step, and all the notes
after it move to the left.
You can save y
Sync
(ON, OFF)
If you played fewer notes while ON than specified in LENGTH, the pattern will repeat from the
beginning after the last captured note and before the start of the next note value.
Octaves
(1 – 4)
Here you can determine whether the arpeggio is to be repeated in the next octave position after the
which it was recorded.
loop completes. For example, if you enter a "2" here, the arpeggio will be played first in the normal, then in the
next higher octave position. The maximum value is 4 octaves. Value 1 plays the arpeggio only at the pitch at
44
AXON AX 100 MKII V. 2.0 (English)
