TerraTec AXON AX 100 MKII Manual Download Page 16

Page: 16 / 75

General notes about operating the Editor

In most cases, the functions are identical to operation on the device. However, using a computer gives you

access to additional options.

Global page - Load all settings / Save all settings

Using these buttons, you can save all the device's settings to the hard drive as a SysEx file (Save all settings)

and restore them later (Load all settings). This is useful before a firmware update or can be used for general

backup purposes.

Presets page – Get Preset / Store to

"Get Preset" activates the preset selected in the drop-down menu. "Store to" permanently saves the preset to

one of the first 128 memory positions in the AXON AX 100 MKII. Select the number under which to save the

preset in the drop-down menu to the right of the "Store to" button.

Preset page – Load from Disk / Save to Disk

To save individual presets to the hard drive, use the "Save to Disk" button. This generates a file with the end-

ing .axp, which you can reload to the device using the "Load from Disk" button. This gives you a very conven-

ient way to exchange presets you have created with other AXON users, for example.

Miscellaneous

■

Functions that are not available due to the current setting are greyed out.

■

Labels can change according to the setting, e.g. Pickcontrol / DynControl.

AXON AX 100 MKII V. 2.0 (English)

Summary of Contents for AXON AX 100 MKII












































































Search results

Summary of Contents for AXON AX 100 MKII

Reviews:

Related manuals for AXON AX 100 MKII

Brands by name

Popular brands

TerraTec AXON AX 100 MKII, Manual

Search results

Summary of Contents for AXON AX 100 MKII

Reviews:

Related manuals for AXON AX 100 MKII

Brands by name

Popular brands