Mode
(PATTERN
quences. You can call either
, TRACK)
As mentioned previously, your AXON has two different options for playing drum se-
individual patterns or complete tracks containing multiple patterns. Use this pa-
to determine the operating mode for the drum sequences during editing.
rameter
Sequencer Pattern
Pattern Editor (1 – 32)
This submenu takes you to the Pattern Editor. Up to 32 patterns can be created and
ogramming a pattern.
Drumkit
either played individually or assembled to complete track sequences in the Track Editor. Select the desired
pattern number with the VALUE +/- buttons and press ENTER to start pr
(Jazz Kit, Brush Kit, etc.)
Choose the drumkit to be used for the drum pattern here.
Steps
(1 – 16)
Here you can specify the number of 1/16 steps within the pattern. Later, you will be able to assign up
to four simultaneous drum instruments in three dynamic levels to each step. A value of 12 corresponds to a
three-quarter beat, for example.
Instruments (1-4)
Select an instrument from the list of the selected drumkit and start the editing process (ENTER button). The
lower half of your AXON display will now show a dotted line with a cursor that you can move back and forth
(PAR/- buttons) according to the individual steps specified in STEPS. Use the VALUE + button to
set an accent at a selected step position. The accent is marked by a small bar at the step position.
Pressing the VALUE + button repeatedly strengthens the accent, which is indicated by a correspondingly lar-
ger bar. Conversely, the VALUE - button weakens existing accents or removes them from the pattern.
Press the EXIT button when you are finished programming the drum instrument. You can now repeat the
process for up to three additional instruments to be used within the pattern.
AXON AX 100 MKII V. 2.0 (English)
55