Terex Evoquip Bison 120, Operation Manual

Page: 75 / 224

Initial Setup and Adjustments 6
Operations Manual
Bison 120
20-07-2018
Page 6-7
Revision 2.0
(3) Checking Hydraulic Oil Level Check
PROCEDURE
1. Observe all safety warnings.
2. Position the machine in a flat, safe place.
3. Check that on the visual indicator (Item 1) on the outside of the tank. Top up hydraulic oil as
required through the refill cap (Item 2,).
Figure 6.3 - Hydraulic Oil Level
(4) Checking Track Tension
PROCEDURE
1. Observe all safety warnings.
2. Position the machine in a flat, safe place.
3. Ensure that the highest part of the track is not too loose and that does not scrape the longeron.
Verify that there is at least 10 mm free space between the upper part of the track and the
longeron (Item 1).
Figure 6.4 - Track tension Measurement