Terex Evoquip Bison 120, Operation Manual

Page: 112 / 224

9 Maintenance
Operations Manual
Bison 120
20-07-2018
Page 9-4
Revision 2.0
16. NEVER make any modifications, additions or conversions which might affect safety without
the supplier’s approval.
17. To prevent any burns or scalds allow the hydraulic oil to cool down before carrying out any
maintenance tasks (approximately 3 hours).
9.2 General Information
Refer to Chapter 2 Safety for relevant safety information before attempting to carry out any
maintenance on the machine.
Maintenance procedures in the maintenance section of this operations manual are intended to be
carried out by trained operators. You must satisfy yourself that you have received to the correct
training before attempting any procedure in the maintenance section, if you have any doubts do
not attempt any procedure and speak to your manager. More complex machine maintenance
that is not covered in the maintenance section of the operators manual must only be carried out
by fully trained service personnel who have taken part in specific maintenance training provided
by us or our approved dealer, please contact your local dealer for further details.
n
WARNING
Allow the machinery to cool.
Dangerous nip points exist.
Keep hands, feet, and clothing clear of power-driven parts and in-running nip points.
Never lubricate, clean, service, or adjust machine while it is moving.
Securely support any machine elements that must be raised for service work.
n
CAUTION
When performing maintenance tasks, always observe the local site safety rules or as provided
in the safety section of this manual.
Where it is necessary to remove any guards for maintenance purposes, make sure that they are
replaced before the machine is restarted.
Practice Safe Maintenance.
Always wear the appropriate protective clothing and use the correct tools and appliances.
NOTICE
The arduous task of continuously crushing stone and the harsh environment in which the machine
has to operate calls for reasonable care. Consideration to be taken to keep the machine in good
working order.
Machinery breakdown caused by insufficient or improper maintenance causes high repair costs
and long-term standstill. Therefore, regular maintenance is imperative.
The following section contains maintenance instructions as well as maintenance schedules for
normal operating conditions.
Understand service procedures before doing any work. Keep the area clean and dry.
Keep all parts in good condition and properly installed. Attend to damage immediately. Replace
Worn or broken parts.