Terex Evoquip Bison 120, Operation Manual

Page: 108 / 224

8 Emergency Operating Procedures
Operations Manual
Bison 120
20-07-2018
Page 8-6
Revision 2.0
2
DUN03195
Figure 8.7 - Emergency Stop Location
8.3 Restarting after Emergency Stop
n
WARNING
Ensure that the problem has been solved and all personnel are clear of the machine.
Before restarting, ensure that all guards are
correctly fitted and fully functional.
Ensure there is no material in and/or on the machine before restarting, including material in the
crusher or feed hopper or on the conveyors and platform walkway.
PROCEDURE
1. Release the emergency stop button(s) by pulling or twisting.
2. Start the machine.
8.4 Testing Emergency Stops
PROCEDURE
1. Start the engine.
2. Push in an emergency stop button.
» The engine will stop, the safety alarm will sound and alarm messages are shown on the display screen..
3. Acknowledge the alarm.
4. Re-set the emergency stop by pulling or twisting, depending on the type fitted.
5. Turn the ignition key to the ‘Off’ position.
6. Turn ignition key to the first position again.
7. Wait for the pre-start warning to complete.
8. Turn ignition key to start the engine again.
9. Repeat the procedure for all other emergency stops.