background image

5 Transportation

Operations Manual

Bison 120

20-07-2018

Page 5-6

Revision 2.0

6.  Ensure that all function toggle switches are in the off position and that the chamber switch 

is in neutral position. 

7.  Turn the ignition key (Item 1) of the radio control to 1, Reference: Figure 5.3.

 

»

The LED light on the handset will be flashing at a fast speed which means the handset is not 

connected .

Figure 5.3 - Radio Ignition Switch

8.  Press button 2 to connect the handset to the reciever, Reference: Figure 5.3.
9.  The green LED on the handset will now be flashing slowly and the blue “STATUS” light on 

the receiver will be flashing showing a connection. 

If a red LED flashes then either:

•  The toggle switches are not all in neutral
•  The battery needs recharged
10.  Press the engine ignition toggle switch (Item 1)  forward on the radio control to start the 

engine, Reference: Figure 5.4.

Figure 5.4 - Ignition Toggle Switch

11.  Use the potentiometer to modify the engine speed (Item 1), Reference: Figure 5.5.

Summary of Contents for Evoquip Bison 120

































































































































































































































Reviews: