79
•
Right-click on the HDMI_DEMO_bsp project in the Project Explore. Select "Nios II" ->
"Generate BSP."
•
Right-click on the HDMI_DEMO_bsp project in the Project Explore. Select "Clean Project."
•
Right-click on the HDMI_DEMO_bsp project in the Project Explore. Select "Build Project."
•
Right-click on the HDMI_DEMO project in the Project Explore. Select "Clean Project."
•
Right-click on the HDMI_DEMO project in the Project Explore. Select "Build Project."
The newly built binary will be located in the "
C5G_HDMI_VPG\Software\HDMI_DEMO
" folder
and named as "
HDMI_DEMO.elf
". You can copy it and overwrite the same binary in the
"
demo_batch
". Please refer to the "Launching the Demonstration" section for how to launch and
execute the demo.
Launching the Demonstration
The pre-built demonstration binaries are located at the "
C5G_HDMI_VPG\demo_batch
" folder,
accompanied with a set of tools in the form of command line batch file. To make a quick start, users
could follow the listed approaches below to configure the development board and execute the
demonstration program.
•
Connect the development board to your PC with the on-board JTAG connector via the bundled
USB cable.
•
Connect the development board to the LCD monitor with the on-board HDMI connector via an
HDMI cable.
•
Power on the development board.
•
Use File Manager to locate the "
C5G_HDMI_VPG\demo_batch
" folder. Launch the
configuration and program download process by double clicking "
test.bat
" batch file. This
will configure the FPGA, download the demo application to the board and start its execution.
A console terminal will be kept on the screen and the user can interact with the demo
application through the console box. After it's done the screen should look like the one shown
in
