Event Log Screen
An Event Log is created for all events and calls related to the TSP. Various filters can be turned
on to eliminate conditions that you may not want to view. There are two views on the
Event Log
.
Events
, which shows all occurrences of any change in state on the TSP and on all calls; and
Calls
, which shows call information only. Clicking on the
Auto-Refresh
button initiates constant
updates on the
Event Log
as changes occur.
Refresh
is used when
Auto-Refresh
is off, which
causes the log to update only when the
Refresh
button is clicked on.
Clear
is used to delete all
information stored in both the
Events
and
Calls
log and starts the log with a clean slate.
is
self-explanatory.
The bottom of the screen has a
Select
section where filters can be used for specific
Events
and/or specific ID’s of the TSP system.
In the
Select
area, different options can be chosen by clicking on the down arrow to the right of
the field.
The
Event and ID
filters are used to look at the events for the specific unit or channels.
Figure 32 Events Screen on Event Log
The
Events
screen shows the date and time of the occurrence, the ID of the specific unit or
channel and what Event actually occurred.
40-400-00049, Rev. J
Page 43
