Templates
Templates
are used to define details of the channel protocols to be used for call simulation. The
basic protocol is set on the
Type
tab, timings for that protocol are set on the
Timings
tab, and the
signaling bit patterns used for the protocol are set on the
Signaling
tab. Click
Template
on the
TSP main screen and choose
New
. A screen requesting to "Enter New Template Name" will
come up. For our example, "Template example" will be the name used. See Figure 22. The
Signaling
tab only appears once a Channel Protocol using bit signaling is chosen.
It is recommended that the Template name reflect the protocol being used. This will make it
easier to distinguish what the protocol of the Template is on the Control Set(s).
Figure 22 Template screen example
Type Tab
The Template has several
Channel Protocols
available listed in the Channel Protocols section.
Click on the
Channel Protocol
arrow to choose an option (scroll down to see all options). Once
the
Template
is assigned to a
Control Set
(discussed in the
Control Set
section), the
Channel
Type
cannot be changed.
Programming the TSP
40-400-00049, Rev. J
Page 29
