Channels Tab
Refer to
Channels Tab
in the Units section for configuring the
Phone Numbers
,
Transmit Digits
and
Audio Message
fields.
In figure
41, the
Subaddress
,
Calling Number
and
Called Number
fields are specific to the T1-PRI
Card Mode. These can be configured per channel or by using the Wizard (see
Channel
Configuration Wizard
section).
Figure 41 Channels Tab on the Units screen
Subaddress
The
Subaddress
an optional extension of the ISDN phone number available with Primary Rate
ISDN.
Calling and Called Number
The
Calling Number
and
Called Number
give the options for
Type of Address
and
Numbering
Plan
that are displayed in the caller ID when sent to the equipment under test.
For
Type of Address
, the options
Unknown Number
,
National Number
,
International Number
and
Subscriber Number
are given. For
Numbering Plan
, the options
Unknown Numbering Plan
,
ISDN
Numbering Plan
,
Telephony Numbering Plan
and
Private Numbering Plan
are available.
Templates
There are two channel protocols that can be used with the templates for TSP-PRI operation. They
are
T1 Primary Rate (CPE)
and
T1 Primary Rate (Networks)
.
When the Slot for the T1 card is configured for CPE Simulation on the
PRI Tab
of the
Units
screen, the TSP will only allow channels to be assigned to templates set for T1 Primary Rate
(CPE) protocol within a control set.
Telecom Simulation Platform
Page 52
