Timings Tab for T1/E1 GS FXO and T1/E1 LS FXO
The
Type
tab for
T1/E1 Ground Start FXO
and
T1/E1 Loop Start FXO
only gives
DTMF Signaling
Type
and no other options. The
Timings
tab for
T1/E1 Ground Start FXO
and
T1/E1 Loop Start
FXO
has the same parameters.
Figure 50 Timings Tab For T1/E1 GS FXO and T1/E1 LS FXO
Originating Calls
Delay Before Dial
The delay before the TSP starts transmitting digits each call made by the TSP.
Terminating Calls
Delay Before Answer
The delay before the TSP sends an off-hook indication once it detects an off-hook from the
equipment under test.
All Calls
Delay Before Message
The delay before an audio file is played if one has been assigned to the channel. Does not apply
to End-to-End calls.
Call Duration/Disable Timeout
Limits the length of the call. Clicking on the box adjacent to
Disable Timeout
will allow the call
duration to be determined by when the TSP receives an on-hook indication. Does not apply to
End-to-End calls.
Telecom Simulation Platform
Page 64
