Timings Tab for T1 PRI (CPE)
The Type tab for T1 PRI has the signaling type fixed as Common Channel (D channel 23) and
Ringback choices disabled.
Figure 57 Timings Tab for T1 PRI (CPE)
The following gives a brief description of the parameters.
Originating Calls
Wait for Answer
The time the TSP waits before abandoning a new call if there is no answer.
Terminating Calls
Delay Before Answer
The delay before the TSP sends an off-hook indication once it detects an off-hook from the
equipment under test.
All Calls
Delay Before Message
The delay before an audio file is played if one has been assigned to the channel. Does not apply
to End-to-End calls.
Call Duration/Disable Timeout
Controls the length of the call before the TSP starts a new call. Clicking on the box adjacent to
Disable Timeout will allow the call duration to be determined by when the TSP receives an
on-hook indication. Does not apply to End-to-End calls.
Disconnect To Start Of New Call
Time TSP delays after going on-hook before resetting for a new call.
Telecom Simulation Platform
Page 70
