Telit Wireless Solutions GS2101M Series, Command Reference Manual

Page: 123 / 196

GS2101M IP2WiFi Adapter Command Reference Guide
1VV0301499
Rev. 2.0 123 2019-08-05
Synchronous Response
Table 102, page 123 describes the synchronous responses and remarks for the Set P2P Find
command.
Asynchronous Response
Table 101 Start Find Parameters
Parameter Optional/Mandatory Value Description
Timeout Mandatory
0 (default)
(0 to 4294967296)
Unit: seconds
If timeout is not specified, then it is
considered as infinite, i.e., the system will be
in find phase forever or until stopped
explicitly using the AT+P2PSTOPFIND
command.The value is a 32 bit variable.
Channels to scan in
search state
Mandatory 1(default) Social channels (1,6 & 11).
Note: Only social scan is currently supported. P2P Find is only supported in un-connected state (P2P device
mode).
NOTE: Time spent per channel during scanning in the P2P search state is
configured through “AT+WST” command.
Table 102 Start Find Synchronous Responses
Events Verbose mode Non Verbose mode Remarks
Success <CR><LF>OK<CR><LF> <CR><LF>0<CR><LF> All parameters are valid.
Failure
<CR><LF>ERROR:<SP>INVALID<SP>INPUT
<CR><LF>
<CR><LF>2<CR><LF> Parameters are valid.