Telit Wireless Solutions GS2101M Series, Command Reference Manual

Page: 184 / 196

GS2101M IP2WiFi Adapter Command Reference Guide
1VV0301499
Rev. 2.0 184 2019-08-05
8.3.4 RSSI
This command is used to get information regarding the received signal strength of the
incoming packets in dBm. WLAN updates the RSSI value of only Management frame
(Beacon).
Command Syntax AT+WRSSI=?
Synchronous Response
Table 164, page 184 describes the synchronous responses and remarks for the Get RSSI
command.
Example AT+WRSSI=?
-33
OK
8.3.5 WLAN Status
This command is used to retrieve information about the current wireless status.
Command Syntax AT+WSTATUS
Synchronous Response
Table 165, page 184 describes the synchronous responses and remarks for the alternate
Status command.
Table 164 Get RSSI Synchronous Responses
Responses Remarks
RSSI
OK
Success
Table 165 Alternate Status Synchronous Responses
Responses Remarks
MODE:<mode> CHANNEL:<channel> SSID:<ssid>
BSSID:<bssid> SECURITY:<security>
OK
Success
The GS node reports the current network
configuration to the serial host:
• Mode
• Channel
• SSID
• BSSID
• Security
NOT ASSOCIATED
OK
If module is not associated with an access
point.