Telit Wireless Solutions GS2101M Series, Command Reference Manual

Page: 72 / 196

GS2101M IP2WiFi Adapter Command Reference Guide
1VV0301499
Rev. 2.0 72 2019-08-05
4.4 Reset
This command is used to reset the GS node. When this command is used without parameter
(AT+RESET), it forcefully resets the module core and comes out with a fresh boot message
“APP Reset-APP SW Reset”.
Command Syntax AT+RESET
Command Syntax AT+RESET=n
Parameter Description
Table 42, page 72 describes the Reset parameters.
NOTE: This command without parameter (AT+RESET) is obsolete and it is
retained for backward compatibility.
NOTE: It is recommended to use this command with parameter (AT+RESET=1).
Table 42 Reset Parameters
Parameter Optional/Mandatory Value Description
n Optional
Value range: 1,2
Format: Decimal
1:Resets the whole system including the RTC
domain.
2: Resets and restores the system to factory
default setting