Telit Wireless Solutions GS2101M Series, Command Reference Manual

Page: 102 / 196

GS2101M IP2WiFi Adapter Command Reference Guide
1VV0301499
Rev. 2.0 102 2019-08-05
5.3.2 Authentication Mode
This command is used to configure the authentication mode.
Command Syntax AT+WAUTH=n
Parameter Description
Table 73, page 102 describes the WiFi Security Configuration Authentication Mode
parameters.
Synchronous Response
Table 74, page 102 describes the synchronous responses and remarks for the WiFi Security
Configuration Authentication Mode command.
Example AT+WAUTH=0
OK
Table 73 WiFi Security Configuration Authentication Mode
Parameter Optional/Mandatory Value Mode Description
n Mandatory
0 (default) None This authentication mode command is
specific to WEP encryption. If
WPA/WPA2 operation is employed, the
authentication mode may be left at the
default value “None.”
1 WEP Open
2 WEP Shared
Table 74 WiFi Security Configuration Authentication Mode Synchronous Responses
Responses Remarks
OK Success
ERROR:INVALID INPUT
If parameters are not valid.
(
n value is other than 0, 1, and 2)