Telit Wireless Solutions GS2101M Series, Command Reference Manual

Page: 181 / 196

GS2101M IP2WiFi Adapter Command Reference Guide
1VV0301499
Rev. 2.0 181 2019-08-05
8.2.4 For Complete Sequence of Live Calibration
After cold boot, it is highly recommended to issue following live calibration commands
before performing any of the Wi-Fi operations:
AT+WLCALERASE
AT+RESET
AT+WLCALSTART=1
8.3 Debug
8.3.1 Log Level
This command is used to configure the debug level so that the response of a command will
include more information (error reason) in case of an error.
Command Syntax AT+LOGLVL=<level>
Command Note
This command can also be used for domain check as well.
Parameter Description
Table 158, page 181 describes the Error Code parameters.
Synchronous Response
Table 159, page 182 describes the synchronous responses and remarks for the Error Code
command.
Table 158 Error Code Parameters
Parameter Optional/Mandatory Value Description
level Mandatory
0 (Default)
No error code or warning message along
with the command response.
1
Error code or warning message along with
the command response.
2
It gives additional information with Error
code or warning message along with the
command response.
If the domain name feature is enabled the
node displays buffer content which contains
alternate names (domain names) provided
in the incoming server certificate.