Telit Wireless Solutions GS2101M Series, Command Reference Manual

Page: 107 / 196

GS2101M IP2WiFi Adapter Command Reference Guide
1VV0301499
Rev. 2.0 107 2019-08-05
5.3.3.4 WPA-PSK and WPA2-PSK Passphrase
This command is used to set the WPA-PSK and WPA2-PSK passphrase. Upon receiving
the command, the PSK passphrase is reset to the value provided.
Command Syntax AT+WWPA=<passphrase>
Parameter Description
Table 80, page 107 describes the WPA-PSK and WPA2-PSK Passphrase parameters.
Synchronous Response
Table 81, page 107 describes the synchronous responses and remarks for the WPA-PSK and
WPA2-PSK Passphrase command.
Example AT+WWPA=test12345
OK
AT+WA=GainSpanDemo,,11
OK
NOTE: It is recommended to use AT+WPAPSK command instead of the following
command. See
5.3.3.5 WPA-PSK and WPA2-PSK Key Calculation, page 108
.
Table 80 WPA-PSK and WPA2-PSK Passpharse Parameters
Parameter Optional/Mandatory Value Description
passphrase Mandatory 8-63
The passphrase is a string containing between 8 and 63
ASCII characters, used as a seed to create the WPA
pre-shared key (PSK).
If the comma (,) is a part of the passphrase, the
passphrase parameter is to be framed in double quotation
marks (“phassphrase”). See
2.7.3 SSID and Passphrase,
page 29 for details.
Table 81 WPA-PSK and WPA2-PSK Phassphrase Synchronous Responses
Responses Remarks
OK Success
ERROR:INVALID INPUT Invalid passphrase