Telit Wireless Solutions GS2101M Series, Command Reference Manual

Page: 115 / 196

GS2101M IP2WiFi Adapter Command Reference Guide
1VV0301499
Rev. 2.0 115 2019-08-05
Table 89, page 115 describes the synchronous responses and remarks for associating with
a network or creating an AP network.
Example AT+WA=GainSpanDemo,,11
OK
Rssi Flag Optional
0: Disable
1: Enable
Default value - 1
This parameter specifies whether RSSI Flag is
enabled or disabled based on the following
configuration values:
0: GS node associates with AP of the first found
SSID or BSSID based on the configured SSIDs or
BSSIDs using AT+WAUTO command.
1: GS node associates with AP that has the best
RSSI in the corresponding regulatory domain.
Note: There is no option to disable this feature as
well.
This parameter in conjunction with Channel
parameter decides the behavior of the GS node as
provided in
Table 89, page 115 .
WPS
Registrar
Optional 1
Initialize WPS registrar.
This will not trigger WPS procedure.
Note: WPS registrar with hidden ssid is not supported
Unscheduled
automatic
power save
delivery
(UAPSD)
configuration
Optional
0,1
0: Disable
1: Enable
It is a bitmap that indicates whether UAPSD is
enabled or not.
• Bit#0 – AC_BK
• Bit#1 – AC_BE
• Bit#2 – AC_VI
• Bit#3 – AC_VO
Table 88 Associate with Network or Create an AP Network Parameters (Continued)
Parameter Optional/Mandatory Value Description
Table 89 Associate with Network or Create an AP Network Synchronous Responses
Responses Remarks
IP SubNet Gateway IPaddress: SubNetaddress: Gateway address Success
ERROR:INVALID INPUT
If parameters are not valid.
ERROR
See 8.3.1 Log Level, page 181 .
Reissue the AT+LOGLVL command to get
more details about the kind of error.
Response changes based on LOGLVL.
ERROR:IP CONFIG FAIL If DHCP fails in infrastructure mode.