manualshive.com logo in svg

Teledyne CD14, User Manual

Share
Download
Teledyne CD14 User Manual Download Page 75

 

Section F – Operation

 

 

CD14 Tester & CD AutoPlus Autosampler User Guide—75-108-800 Rev. B—31 May 2021 

74 of 130 

EAR99 technology subject to restrictions on cover page. 

 

 

Sampling Alarms tab 

This screen provides the user with the ability to enable a 
sampling alarm. The sampling alarm notifies the user when a 
sample point is upcoming when a test is running. A message 
is displayed on the screen with an alarm sound.  

On/Off Switch: Enables/disables notifications at sampling 
events. 

Prenotification Time: The amount of time before a sample 
point the alarm begins to sound. For example, if the user set 
the alarm to 0:01, the alarm would begin 1 minute before each 
sample point (0 – 9:59 in hh:mm). 

NOTE: If enabled from the method, a sampling wizard appears 
guiding the user when to take a manual sample. 

Alarm Tone: The tone the instrument will play when the alarm 
triggers. The current tone is played when the ‘Play’ icon is 
touched. 

 

 

Summary of Contents for CD14




































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands