manualshive.com logo in svg

Teledyne CD14, User Manual

Share
Download
Teledyne CD14 User Manual Download Page 61

 

Section F – Operation

 

 

CD14 Tester & CD AutoPlus Autosampler User Guide—75-108-800 Rev. B—31 May 2021 

60 of 130 

EAR99 technology subject to restrictions on cover page. 

 

 

 

Named ‘logo.jpg’ 

2. 

Load the image into the root directory of a USB flash 
drive. 

3. 

Insert the USB flash drive into the USB port next to 
the fingerprint scanner of the CD14 Tester 
instrument. 

4. 

Touch the Logo field to load the logo into the 
instrument. 

NOTE: The previous logo will be overwritten by the 
new logo. Only one logo can be present in the 
instrument at a time. 

Method Labels tab 

The Method Labels tab allows for editing the fields of the 
method labels section. Up to 8 label fields are available, each 
having a maximum length of 25 characters.  

The default values are: 

Method Name: This field always contains the method name 
and cannot be changed. 

Drug Name: The name of the drug the method is designated to 
test (e.g., Aspirin). 

Dosage: The dosage size of the drug to be tested (e.g., 300 
mg). 

Method ID: A secondary ID for the method; this does not need 
to be unique. 

Summary of Contents for CD14




































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands