Teledyne CD14 User Manual Download Page 68

Page: 68 / 131

Section F – Operation

CD14 Tester & CD AutoPlus Autosampler User Guide—75-108-800 Rev. B—31 May 2021

67 of 130

EAR99 technology subject to restrictions on cover page.

Versions screen

The Versions screen provides information on the software
installed on the CD14 Tester. This screen is accessed by
touching the About button.

User Interface Version: User interface firmware version.

Controller Version: Main controller firmware version.

Spindle Drive (A/B) Version: Motor drive firmware versions.

Temperature Control Version: Temperature control firmware
version.

Magazine Board (A/B) Version: Magazine board firmware
versions.

Sampler (A/B) Version: Autosampler firmware versions.

Collector (A/B) Version: AutoFill collector firmware versions.

Cumulative Motor (A/B) On Time: Cumulative motor on time
on the instrument motors.

Cumulative Heater On Time: Cumulative time on the
instrument heater.

Help tab

Additional help information and links.

Summary of Contents for CD14




































































































































Search results

Summary of Contents for CD14

Reviews:

Brands by name

Popular brands

Teledyne CD14, User Manual

Search results

Summary of Contents for CD14

Reviews:

Brands by name

Popular brands