manualshive.com logo in svg

Teledyne CD14, User Manual

Share
Download
Teledyne CD14 User Manual Download Page 74

 

Section F – Operation

 

 

CD14 Tester & CD AutoPlus Autosampler User Guide—75-108-800 Rev. B—31 May 2021 

73 of 130 

EAR99 technology subject to restrictions on cover page. 

 

 

User Alarms tab 

User alarms are customizable alarms which can be set up to 
display a specific message. The alarms can be used to notify 
users when to change the bath water, or any other routine 
task. The user alarms can be set for a specific time and date 
and can be set to repeat.  

The alarm displays a reminder message on the screen with an 
alarm sound. The alarm will stop when the user touches OK 
on the alarm notification pop-up. 

On/Off Switch: Enables/disables the user alarms. 

Alarm Number: Toggles between the 3 user alarms available. 

Alarm Date/Time: The date/time the alarm will trigger the 
reminder message. 

Recurrence: The method by which the alarm repeats. Either 
never, at specific days of the week, or at day intervals. 

Alarm Tone: The tone the instrument will play when the alarm 
triggers. The current tone is played when the ‘Play’ icon is 
touched. 

Reminder: The text displayed when the alarm triggers. For 
example, if the operator sets this to “Change Tester Bath 
Water” the text “Change Tester Bath Water” would be 
displayed when the alarm triggers. 

 

 

Summary of Contents for CD14




































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands