Tektronix WCA230A, Programmer'S Manual

Page: 53 / 678

Command Groups
WCA230A & WCA280A Programmer Manual
2- 27
:INSTrument Commands
Sets the measurement mode for the analyzer.
Table 2- 20: :INSTrument commands
Header Description
:INSTrument:CATalog? Queries all the measurement modes that the analyzer has.
:INSTrument[:SELect] Selects the measurement mode.
:MMEMory Commands
Manipulates files residing on the internal hard disk or floppy disk.
Table 2- 21: :MMEMory commands
Header Description
:MMEMory:COPY Copies the contents of a file to another.
:MMEMory:DELete Deletes a file.
:MMEMory:LOAD:CORRection Loads the correction table from a file.
:MMEMory:LOAD:IQT Loads the IQ data from a file.
:MMEMory:LOAD:STATe Loads the analyzer settings from a file.
:MMEMory:LOAD:TRACe Loads trace data from a file.
:MMEMory:NAME Specifies the file name for hard copy output.
:MMEMory:STORe:ACPower Stores the ACPR measurement results in a file in the RFID analysis.
:MMEMory:STORe:CORRection Stores an amplitude correction table in a file.
:MMEMory:STORe:IQT Stores IQ data in a file.
:MMEMory:STORe:PULSe Stores the pulse measurement results in a file.
:MMEMory:STORe:STABle Stores a symbol table in a file.
:MMEMory:STORe:STATe Stores the analyzer settings in a file.
:MMEMory:STORe:TRACe Stores trace data in a file.