Tektronix WCA230A, Programmer'S Manual, Page: 71 / 678

IEEE Common Commands
WCA230A & WCA280A Programmer Manual
2- 45
*RST (No Query Form)
Restores the analyzer to the factory default settings. For the actual settings, refer
to Appendix C: Factory Initialization Settings . This command is equivalent to a
pair of commands :SYSTem:PRESet and *CLS that run successively.
The *RST command does not alter the following:
H
The state of the IEEE Std 488.1--1987 interface.
H
The selected IEEE Std 488.1--1987 address of the analyzer.
H
Measurement mode selected with the :INSTrument[:SELect] command.
H
Calibration data that affect device specifications.
H
The Output Queue.
H
The Service Request Enable Register setting.
H
The Standard Event Status Enable Register setting.
H
The Power-on status clear flag setting.
H
Stored settings.
*RST
None
All
*RST
resets the analyzer.
*CLS, :INSTrument[:SELect], :SYSTem:PRESet
Syntax
Arguments
Measurement Modes
Examples
Related Commands