:SENSe Commands
2- 450
WCA230A & WCA280A Programmer Manual
[:SENSe]:RFID:ACPower:CSPacing(?)
Sets or queries the channel-to-channel spacing in the ACPR measurement.
This command is valid when [:SENSe]:RFID:MEASurement is set to CARRier.
[:SENSe]:RFID:ACPower:CSPacing <value>
[:SENSe]:RFID:ACPower:CSPacing?
<value>::=<NRf>
specifies the channel-to-channel spacing.
Range: (bin bandwidth)
×
8 to full span [Hz].
Refer to the
WCA230A and WCA280A User Manual
for the bin bandwidth.
DEMRFID
:SENSe:RFID:ACPower:CSPacing 1.4MHz
sets the channel-to-channel spacing to 1.4 MHz.
[:SENSe]:RFID:MEASurement
[:SENSe]:RFID:ACPower:FILTer:COEFficient(?)
Sets or queries the filter roll-off rate for the ACPR measurement when
[:SENSe]:RFID:ACPower:FILTer:TYPE is set to NYQuist (Nyquist filter) or
RNYQuist (Root Nyquist filter).
This command is valid when [:SENSe]:RFID:MEASurement is set to CARRier.
[:SENSe]:RFID:ACPower:FILTer:COEFficient <ratio>
[:SENSe]:RFID:ACPower:FILTer:COEFficient?
<ratio>::=<NRf>
specifies the roll-off rate. Range: 0 to 1.
DEMRFID
:SENSe:RFID:ACPower:FILTer:COEFficient 0.5
sets the filter roll-off rate to 0.5.
[:SENSe]:RFID:ACPower:FILTer:TYPE, [:SENSe]:RFID:MEASurement
Syntax
Arguments
Measurement Modes
Examples
Related Commands
Syntax
Arguments
Measurement Modes
Examples
Related Commands
Summary of Contents for WCA230A
