Tektronix WCA230A, Programmer'S Manual

Page: 508 / 678

:SENSe Commands
2- 482
WCA230A & WCA280A Programmer Manual
[:SENSe]:SPECtrum:BANDwidth|:BWIDth:STATe(?)
Determines whether to perform the resolution bandwidth (RBW) process.
[:SENSe]:SPECtrum:BANDwidth|:BWIDth:STATe { OFF | ON | 0 | 1 }
[:SENSe]:SPECtrum:BANDwidth|:BWIDth:STATe?
OFF
or
0
specifies that the RBW process is not performed so that a spectrum
immediately after the FFT process is displayed on screen.
ON
or
1
specifies that the RBW process is performed.
All S/A modes except SARTIME and SAZRTIME
:SENSe:SPECtrum:BANDwidth:STATe ON
specifies that the resolution bandwidth process is performed.
[:SENSe]:SPECtrum:BANDwidth|:BWIDth:VIDeo(?)
Sets or queries the frequency bandwidth of the video filter.
This command is valid when :INSTrument[:SELect] is set to DEMRFID and
[:SENSe]:RFID:MEASurement is set to SPURious.
[:SENSe]:SPECtrum:BANDwidth|:BWIDth:VIDeo <value>
[:SENSe]:SPECtrum:BANDwidth|:BWIDth:VIDeo?
<value>::=<NRf>
specifies the frequency bandwidth of the video filter.
Range: 0 to 1 GHz. The setting value may be limited by the sweep time setting.
DEMRFID
:SENSe:SPECtrum:BANDwidth:VIDeo 100kHz
sets the frequency bandwidth of the video filter to 100 kHz.
:INSTrument[:SELect], [:SENSe]:RFID:MEASurement
Syntax
Arguments
Measurement Modes
Examples
Syntax
Arguments
Measurement Modes
Examples
Related Commands