Tektronix WCA230A, Programmer'S Manual

Page: 474 / 678

:SENSe Commands
2- 448
WCA230A & WCA280A Programmer Manual
:DECode  PIE-A" |  PIE-C" |  FM0"
|  MANCHESTER" |  MILLER"
|  MILLER-2" |  MILLER-4"
|  MILLER-8" |  M-MILLER"
|  NRZ" |  NRZ-L8" |  NRZ-L4"
|  NRZ-L2" |  PWM" |  BITCELL"
:FORMat  ASK" |  DSB-ASK" |  SSB-ASK"
|  PR-ASK" |  OOK"
|  SC-OOK" |  SC-BPSK" |  FSK"
:INTerpolate <numeric_value>
:LINK INTerrogator | TAG
:SERRor[:WIDTh] <numeric_value>
:STANdard  18000-4-1" |  18000-6-A"
|  18000-6-B" |  18000-6-C"
|  14443-2-A" |  14443-2-B"
|  F-13.56MHz" |  C0G1" |  C1G1"
|  MANUAL"
:TARI
:AUTO <boolean>
[:SET] <numeric_value>
[:THReshold]
:HIGHer <numeric_value>
:LOWer <numeric_value>
:OFFSet <numeric_value>
:SPurious
[:THReshold]
:EXCursion <numeric_value>
:IGNore <numeric_value>
:SIGNal <numeric_value>
:SPURious <numeric_value>
:ZOOM
:FREQuency
:CENTer <numeric_value>
:WIDTh <numeric_value>
The [:SENSe]:RFID:ACPower commands are based on the [:SENSe]:ACPower
commands in the S/A mode. Refer to page 2--372.
The [:SENSe]:RFID:SPURious commands are based on the [:SENSe]:SPURious
commands in the S/A mode. Refer to page 2--495.