Tektronix WCA230A, Programmer'S Manual

Page: 420 / 678

:SENSe Commands
2- 394
WCA230A & WCA280A Programmer Manual
[:SENSe]:CHPower:FILTer:COEFficient(?)
Sets or queries the roll-off rate of the filter for the channel power measurement
when you have selected either NYQuist (Nyquist filter) or RNYQuist (Root
Nyquist filter) in the [:SENSe]:CHPower:FILTer:TYPE command.
[:SENSe]:CHPower:FILTer:COEFficient <ratio>
[:SENSe]:CHPower:FILTer:COEFficient?
<ratio>::=<NRf>
specifies the roll-off rate of the filter for the channel power
measurement. Range: 0.0001 to 1 (default: 0.5)
SANORMAL, SASGRAM, SARTIME, SADL3G, SAUL3G
:SENSe:CHPower:FILTer:COEFficient 0.3
sets the filter roll-off rate to 0.3.
[:SENSe]:CHPower:FILTer:TYPE
[:SENSe]:CHPower:FILTer:TYPE(?)
Selects or queries the filter for the channel power measurement.
[:SENSe]:CHPower:FILTer:TYPE { RECTangle | GAUSsian | NYQuist
| RNYQuist }
[:SENSe]:CHPower:FILTer:TYPE?
RECTangle
selects the rectangular filter.
GAUSsian
selects the Gaussian filter.
NYQuist
selects the Nyquist filter (default).
RNYQuist
selects the Root Nyquist filter.
SANORMAL, SASGRAM, SARTIME, SADL3G, SAUL3G
:SENSe:CHPower:FILTer:TYPE RNYQuist
selects the Root Nyquist filter.
Syntax
Arguments
Measurement Modes
Examples
Related Commands
Syntax
Arguments
Measurement Modes
Examples