Tektronix WCA230A, Programmer'S Manual

Page: 120 / 678

:DISPlay Commands
2- 94
WCA230A & WCA280A Programmer Manual
:DISPlay:CCDF:LINE:REFerence:STORe (No Query Form)
Stores the current CCDF trace as a new reference line and automatically enables
the reference line display.
:DISPlay:CCDF:LINE:REFerence:STORe
None
TIMCCDF
:DISPlay:CCDF:LINE:REFerence:STORe
stores the current CCDF trace as a new reference line.
:DISPlay:CCDF:LINE:REFerence[:STATe]
:DISPlay:CCDF:X[:SCALe]:AUTO(?)
Determines whether to automatically set the horizontal, or power, scale in the
CCDF view.
:DISPlay:CCDF:X[:SCALe]:AUTO { OFF | ON | 0 | 1 }
:DISPlay:CCDF:X[:SCALe]:AUTO?
OFF
or
0
specifies that the horizontal scale is set manually (default). Use the
:DISPlay:CCDF:X[:SCALe]:MAXimum and the :DISPlay:CCDF:X[:SCALe]-
:OFFSet commands, detailed below, to set the horizontal axis.
ON
or
1
specifies that the horizontal scale is set automatically.
TIMCCDF
:DISPlay:CCDF:X:SCALe:AUTO ON
specifies that the horizontal scale is set automatically.
:DISPlay:CCDF:X[:SCALe]:MAXimum, :DISPlay:CCDF:X[:SCALe]:OFFSet
Syntax
Arguments
Measurement Modes
Examples
Related Commands
Syntax
Arguments
Measurement Modes
Examples
Related Commands